Category: EMO 2023

HORN: High Performance in Stainless Steels

Horn has developed a new, solid carbide milling cutter range especially for machining stainless steels. The tools are for milling stainless materials in the food, chemical and pharmaceutical industries as well as the precision engineering and watchmaking industries. In addition, due to their geometry and good chip breaking, the milling tools are suitable for machining numerous other materials. Due to the precise combination of the substrate, the macro and micro geometry as well as the IG3 coating, the milling system exhibits high performance and long tool life. The coating in particular offers high temperature resistance for machining steels alloyed with chromium, nickel and molybdenum.

Horn offers the solid carbide milling tools from stock in two types. The DSHPR variant is suitable as both a finishing and a roughing tool. The geometry is also adapted for trochoidal machining and plunging. The DSR type, with its very sharp cutting edge geometry and short design, is suitable for very small parts and unstable clamping conditions, such as in the medical and watchmaking industries. In the DSHPR line, all tools are available with four teeth and in diameters from 2 mm (0.079″) to 20 mm (0.787″). Horn offers the DSR variant with three teeth in diameters from 1 mm (0.039″) to 10 mm (0.394″).

 

HORN: Superfinishing of Bores with Supermini System

At EMO 2023 in Hannover, Horn is presenting an innovative extension for the Supermini system in the field of ultra-fine machining. The precision tool manufacturer has added a variant with a precision-ground rake face to the Supermini system especially for ultra-fine machining of bores. Due to precision grinding of the cutting edge, it is free from notches when magnified approximately 200 times. The tool system can be used from an inside diameter of 0.3 mm (0.012″). The sharp insert geometry enables process reliability even with very small infeed and cutting feed rates. The specially developed coating is suitable for stainless steels, non-ferrous metals and other metallic materials.

The insert of the Supermini Type 105 system requires only one tool holder for well over 1,000 insert variants. This applies equally to left-hand and right-hand versions. The carbide inserts are available in coated and uncoated versions in different grades for every application including hard machining up to 66 HRC. The patented droplet shape of the cross-section has a vibration-damping effect and delivers excellent repeatability when changing the insert. Internal coolant supply to the insert increases tool life, enhances cutting performance and improves chip removal. Horn offers the tools with elements for face clamping. This allows, for example, the insert to be changed easily without having to remove the holder from the machine.

History Horn Supermini:

In 1989, HORN launched the technically superior Supermini system at the world’s largest metalworking trade show, EMO in Hannover, Germany. After considerable technical development, it was possible to successfully manufacture precision internal grooving tools for bores down to 5 mm (0.197″) in diameter. The Supermini system was born and over time became one of Horn’s most successful products. In addition, the Supermini system was the first precision tool to benefit from Horn’s own in-house coatings.